JASA UNLOCK HANDPHONE LUAR NEGERI YANG TIDAK BISA PAKAI DI INDONESIA


How To Enter Code


Learn how to enter your unlock code on your mobile phone !


Code Instructions
many new phones added hope it will be help

Blackberry

5xxx, 6xxx, 7xxx Series (except for BB 7100 and 7130)
Turn wireless mode off
Go to “Options” menu
Go to “SIM card”then press the jogdial to select it
Type MEPD (not case sensitive). You will not see text appear on screen while typing
It will say “Network active”
Press and hold the ALT key (half moon looking key on the lower left side)
While holding the ALT key type in MEPE (not case sensitive). You will not see text appear on screen while typing
When prompted enter supplied unlock code
After entering the code press the jog dial
Your phone is unlocked

Blackberry 7100, 7130
Turn wireless mode off
While on the home screen click the “Tools” icon
Go to “Options” menu
Select “Settings”
Go to “SIM card” then press the jogdial to select it. You should see the phone number and the SIM ID number
Type MEPP2 (not case sensitive). You will not see text appear on screen while typing.
Press ALT and 2 simultaneously to get number 2.
Enter supplied unlock code
After entering the code press the jog dial
Your phone is unlocked

Blackberry 8100 Pearl
Unlocking can be done without SIM card inserted
Turn wireless mode off
While on the home screen click the “Settings” icon
Go to “Options” menu
Select “Advanced options”
Go to “SIM card” then press the jogdial to select it
Type MEPP2. You will not see text appear on screen while typing
Press ALT and 2 simultaneously to get number 2.
Enter supplied unlock code
After entering the code press the trackball once
Your phone is unlocked
If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited. When this number is reached the phone will be permanently blocked.

alternative instructions
Insert SIM card into the device
Power on the phone and turn Wireless Off
Go to “Settings” then “Options” menu and select “Advanced options”
Go to “SIM card” then press the jogdial to select it
Type MEPPD. Please note that you will not see what you type on the screen.
Type MEPP2. You will not see text appear on screen while typing
Press ALT and 2 simultaneously to get number 2.
Enter supplied unlock code
After entering the code press the trackball once
Your phone is unlocked

alternative instructions for some Vodafone Blackberry 8100
Insert non original SIM card into the device
Power on the phone and turn Wireless Off
Go to “Settings” then “Advanced options”
Go to “SIM card” then press the jogdial to select it
Type MEPP2 while holding Alt, multitap enabled (hold [Alt], type [M] [ER] [OP] [OP] [TY]. Please note that you will not see what you type on the screen.
When prompted with “Enter Network MEP code (255 left)” on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter
Pull the battery out of the phone
Switch the phone on and the phone will be automatically unlocked
If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited. When this number is reached the phone will be permanently blocked.
To unblock such phone, it must be taken to a RIM service centre. No outgoing calls including emergency call is possible when the phone is blocked.

Blackberry Curve, 8800, 8300
Unlocking can be done without SIM card inserted
Turn wireless mode off
While on the home screen click the “Settings” icon
Go to “Options” menu and select “Advanced options”
Select “SIM card”
Hold the ALT key while typing MEPE. You will not see text appear on screen while typing
You should be presented with a prompt “Enter Network MEP Code”
Enter supplied unlock code
After entering the code press the trackball once
Your phone is unlocked
If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited. When this number is reached the phone will be permanently blocked.
To unblock such phone, it must be taken to a RIM service centre. No outgoing calls including emergency call is possible when the phone is blocked.

alternative instructions
Turn wireless mode off
While on the home screen click the “Settings” icon
Go to “Options” menu and select “Advanced options”
Select “SIM card”
While holding the ALT key type MEPD. You will not see text appear on screen while typing
While holding the ALT key type MEPE. You will not see text appear on screen while typing
You should be presented with a prompt “Enter Network MEP Code”
Enter supplied unlock code
After entering the code press the trackball once
Your phone is unlocked

Blackberry 8700, 8700c, 8707
Unlocking of these models requires a SIM card inserted (active or inactive)
Turn wireless mode off
While on the home screen click the “Settings” icon
Go to “Options” menu and select “Advanced options”
Select “SIM card”
Hold the ALT key while typing MEPE. You will not see text appear on screen while typing
You should be presented with a prompt “Enter Network MEP Code”
Enter supplied unlock code
After entering the code press the trackball once
Your phone is unlocked

Blackberry 8230 Curve
Press the “menu” key
Scroll and select “Manage connections”
Select “Turn all connections off”
Press “Escape” to go back to the “Home” screen
Go to “Options” menu and select “Advanced options”
Select “SIM card”
Hold the ALT key while typing MEPD. You will not see text appear on screen while typing. This opens up a personalization menu
Hold the ALT key while typing MEP2. You will not see text appear on screen while typing
Press ALT and 2 simultaneously to get number 2.
You should be presented with a prompt “Enter Network MEP Code”
Enter supplied unlock code
After entering the code press the trackball once
Restart your phone and restore connections by following the first two steps
Your phone is unlocked

Blackberry 9000, 9500, 9530 Storm
Insert any sim card
Scroll and select “Manage connections”
Select “Turn all connections off”
Press “Escape” to go back to the “Home” screen
Go to “Options” menu and select “Advanced options”
Select “SIM card”
Select “Show keyboard”
Hold the ALT key while typing MEPD. You will not see text appear on screen while typing. This opens up a personalization menu
Hold the ALT key while typing MEP2. You will not see text appear on screen while typing
Press ALT and 2 simultaneously to get number 2.
You should be presented with a prompt “Enter Network MEP Code”
Enter supplied unlock code
After entering the code press the trackball once
Restart your phone and restore connections by following the first two steps
Your phone is unlocked

Sidekick / Hiptop

All models
Insert a non accepted SIM card and turn on the Sidekick
A dialogue screen will prompt you to enter the code:

Title: Special Code Required
Dialog: Enter code to enable SIM
Box for Code: 1-8 digits
Options: Enable or Cancel
On you having entered the code a dialogue box will come up saying Authenticating code

In case you see the “Waiting for Activation Screen”, hit the Menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the Waiting for Activation screen disappears.
Your Sidekick/Hiptop cell phone is now unlocked

Sierra wireless aircard

Windows XP and 2000 via Communication Manager
Insert a non accepted SIM into PC Card and insert card into computer
Launch the Communication Manager program. The prompt will display “Incorrect SIM”

Note that you must have a generic Communication manager to be able to enter the code. If you you are using communication software from your provider you have to uninstall it and download the one from Sierra website directly.
In the “Please enter special code” field, enter the 8 digit unlock code.

If the message does not appear or “No SIM” is displayed, proceed to the HyperTerminal instructions.
Press Send
Your Sierra PC card is unlocked

Windows XP and 2000 via HyperTerminal

Use these instructions if the Communication Manager software is not installed on the computer or if the Communication Manager instructions did not work the first time.

Identify COM Port:
With PC card inserted in computer, go to the Start menu>Settings>Control Panel
In the Control Panel, double-click on Phone and Modem Options
Click the Modems tab and the modems installed on the laptop will be listed
Locate the Sierra Wireless AirCard modem, and make note of the COM port in the “Attached To” column
Close all Windows and return to the desktop
Enter Unlock Code:
With PC card inserted in computer, go to the Start menu>Programs>Accessories>Communications>HyperTerm inal Program
In the Connection Description window, enter a name into the Name field and click OK. – Selection of an Icon is not required.
In the Connect To window, leave the Phone Number blank.
In the Connect Using field, select the COM port where the PC card (modem) is connected. Click OK. – Generally COM 1 is selected.
Under Port Settings, select the “Bits per second” field to display 115200. Leave the default values in all of the other fields and click OK.
Type ATE1 and press Enter. – An OK response will return
Type AT+CLCK=”PN”,0, and press Enter. – An OK response will return
The PC card is now unlocked.

Option Data Cards

Windows XP and 2000 via HyperTerminal

Identify COM Port:
With PC card inserted in computer, go to the Start menu>Settings>Control Panel
In the Control Panel, double-click on Phone and Modem Options
Click the Modems tab and the modems installed on the laptop will be listed
Locate the Option modem, and make note of the COM port in the “Attached To” column
Close all Windows and return to the desktop
Enter Unlock Code:
With PC card inserted in computer, go to the Start menu>Programs>Accessories>Communications>HyperTerm inal Program
In the Connection Description window, enter a name into the Name field and click OK. – Selection of an Icon is not required.
In the Connect To window, leave the Phone Number blank.
In the Connect Using field, select the COM port where the PC card (modem) is connected. Click OK. – Generally COM 1 is selected.
Under Port Settings, select the “Bits per second” field to display 115200. Leave the default values in all of the other fields and click OK.
Type ATE1 and press Enter. – An OK response will return
Type AT+CLCK=”PN”,0, and press Enter. – An OK response will return
The PC card is now unlocked.
Verify that the card is unlocked:
To verify card is unlocked, type ‘ati’+clck=”pn”,2′ and press Enter.
If the command returns ‘0′, then the card is unlocked.

Samsung

If you received two unlock codes the first one is Unfreeze code. The second code is Network Unlock Code (NCK). If you received only one code from us it’s a Network Unlock Code (NCK).

How to remove Phone freeze

A frequent reason for Freeze Code to be enabled is when user enters several erroneous NCK codes.

If your cell phone shows a “Phone Freeze” message use the first code to unfreeze it. Enter the 8-digit code with SIM card in the phone when the “Phone Freeze” message is displayed, then press OK button (middle buttom, depending on phone branding can be called differently).

You will not see text appear on screen while typing.

You can now proceede to entering Network Unlock Code.

How to enter Network Unlock Code

Samsung Z510, Z650, Z320i
Power on without SIM card
Type in **CODE# where CODE is the unlock code you received from XXXXXXXX

Samsung Z105 and Z107
Power on with a non accepted SIM card
Type in #7465625*638*CODE# (or *#7465625*638*CODE#) where CODE is the unlock code you received from XXXXXXXX
Press the SEND key, display should read, “Personalization Cancelled”

Samsung 3G series, D, Z-series, some A-, C-, E-, T-, X-series, other models
Power on without SIM card
Type in #7465625*638*CODE# (or *#7465625*638*CODE#) where CODE is the unlock code you received from XXXXXXXX
Press the SEND key, display should read, “Personalization Cancelled”

Other Samsung models
Power on without SIM card
Phone will ask for “Password”
Enter the unlock code you received from XXXXXXXX
Note: In some instances the phone won’t ask for “Password” – enter the unlock code anyway
OR if phone shows “Insert Correct SIM card”
Power on with a non accepted SIM card
Type in #0111*CODE# where CODE is the unlock code you received from XXXXXXXX
Press the SEND key, display should read, “Personalization Cancelled”

i607 Blackjack
Power on with incorrect (non accepted) SIM card, when asked to enter network pin enter provided unlock code.
No need to hold other keys while entering code

If you are unable to connect to the service provider or unable to make out-going calls or receive messages, this has nothing to do with your phone being locked. You need to force the Blackjack to change to GSM mode:
Power on the phone
Enter *#1546792*#
Select Option 3 Network & Call Settings
Select Option 5 Network Mode
Select GSM

Quickfire

Power off device and remove AT&T SIM card
Insert SIM Card from another wireless carrier
Power on the handset
With the device in Portrait mode, tap the phone icon
Dial *#865625# to enter the unlock code menu
Display now says “TO UNLOCK SIM ENTER UNLOCK CODE CORRECTLY. FIVE (5) TIMES WILL RESULT IN THE PERMANENT LOCK OF YOUR PHONE CONTINUE?”
Enter the 15-digit code given to you by, then tap DONE. If you entered an incorrect code, you will see the following message: “INCORRECT LOCK CODE” “INCORRECT UNLOCK CODE TRY AGAIN”
If the code is correct, tap on DONE. The handset is now successfully unlocked

HP iPAQ

iPAQ 6320, 6325, 6510, 6515
Power on phone with a non-original SIM card inserted
Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has previously attempted to unlock with the wrong code)
Enter your unlock code when prompted by the phone
Press OK
If the unlock code is correct, a success dialog will appear. Press OK

If the unlock code is incorrect, an error dialog will appear. After pressing OK, the user has to re-enter the unlock code after a delay (see above in Device Specific Information)

iPAQ 6315
On the Today screen, tap Start > Settings
Tap the Phone band icon and choose ” North America” or “Europe” or “Asia” phone band depending on where you are
Tap the keyboard icon to open the virtual keyboard
Tap Shift and then Ctl key to enable the keys
Tap the blank area below the band selection box to open the unlock tool
Tap Shift and then Ctl to disable the keys
Enter the unlock code you received from XXXXXXXX, and tap OK when done
Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
“Unlock successful”
The device is now unlocked and should continue booting.

“Unlock failed due to incorrect code”
The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.

“Your phone is not ready for unlocking”
This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.
Palm One

Treo 650, 680
Power on phone with a non-original SIM card inserted
Turn wireless off
It will then say “Your phone cannot be used with this SIM card” (“SIM not allowed” in case of Treo 650). Click OK
Click dialpad tab, bottom of the screen far left
Using stylus enter *#*#unlock code# and press the green button
It will say “The sim lock has been removed from your phone”
Your phone is unlocked

Treo 750
Power on phone with a non-original SIM card inserted
Turn wireless off
Using onscreen keyboard enter the supplied unlock code
Your phone is unlocked

Sony Ericsson

All models
Power on your phone without SIM card or with Original one
Press joystick left once
Press * twice
Press joystick left once
Phone will say “Personalize with MNC2″ or “Personalized with MNC3″
Wait approximately 5 seconds
The display will indicate “Network” and a picture of a closed padlock
Press Select
The display will indicate “Unlock (Net) 5″ and “NCK:”
You can now enter the supplied unlock code
Phone will display “Network unlocked” and then “Insert SIM” message
Your phone is unlocked

If your phone has a jogdial press it down instead of joystick left.
LG

LG F2250
Power on phone with Orange SIM card inserted
While in the Start menu type 2945#*3311#
Return to the startup screen
Press Menu key
Select Settings > Security > Sim Lock > Network > Deactivate
Enter supplied unlock code
Your phone is unlocked

LG U400
Power on phone with an original (from the locked carrier) SIM card inserted
Type 2945#*9636#
The phone will then prompt “Unlock sim”. Press “OK”
The phone will then prompt “Network Unlock”. Press “OK”
Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code.
he phone will give you message “Succeess”
Go back to the main screen and enter 2945#*88110#
The phone will then prompt “Unlock sim”. Press “OK”
The phone will then prompt “Network Unlock/Lock” but if you scroll down you will see a message Enter SP Lock. Enter SP Code
Then press “OK”
Your phone is unlocked

LG U8110
Power on phone with a non-original SIM card inserted
Type 277634#*#
Select “Sim Unlock”
Enter supplied unlock code
Your phone is unlocked

LG U8150, other UMTS models
Power on phone with a non-original SIM card inserted
Type 277634#*#
Go to menu “SIM Lock”
Enter supplied unlock code
Your phone is unlocked

LG U8210
Power on phone with a non-original SIM card inserted
Type 277634#*#
Go to “Sim Test” and type 2945#*#
Select “Sim Unlock”
Enter supplied unlock code
Your phone is unlocked

LG CU400, CU500 Cingular AT&T
Power on phone with a non-original SIM card inserted
Phone will display “Invalid SmartChip” If the phone doesn’t display “Invalid SmartChip” power off and on, then try again
Type 159753#*#
Select “1 Unlock USIM”, then “1 network lock”
Phone will display “Enter NCK, Remaining 5″
Enter the 8 digit unlock code
Select “OK”
Your phone is unlocked

LG CU575, CU515 Trax Cingular AT&T
Power on phone with a non-original SIM card inserted
Phone will display “Invalid SmartChip” If the phone doesn’t display “Invalid SmartChip” power off and on, then try again
Type *#865625#
Select option 1 and then again select 1
Enter the supplied unlock code
Your phone is unlocked

LG CU720, TU720, other SHINE series
Power on phone with an original (from the locked carrier) SIM card inserted
Type *#865625#CODE where CODE is the unlock code provided by XXXXXXXX
Select “OK”
Your phone is unlocked
If this didn’t work you can also try to repeat the above steps with a non-original SIM card inserted

LG CE110
Prior to unlocking reset the phone to “Factory Default”
Power on phone with a non-accepted SIM card
Select “Cancel” – phone will displays “Phone restriction code”
Enter supplied unlock code
Select “OK”
Your phone is unlocked

LG CE500
Power on phone with Cingular SIM card
Type 2945#*7101#
Select Settings > Security > Sim Lock > Network > Deactivate
Enter supplied unlock code
Your phone is unlocked

LG KG275
Power on phone with non original SIM card
Type in the code you received from XXXXXXXX
Press “Send” key
Your phone is unlocked
If this didn’t work append #*# to the end of the entered code

LG C3310
Power on phone with a non-original SIM card inserted
Type 2945#*3311#
Go to “Menu” and then to “Settings”
Select “Security”
Select “Network Provider” and then “Deactivate”
Enter supplied unlock code
Your phone is unlocked

LG KE970 SHINE
Power on phone with an original (from the locked carrier) SIM card inserted
Press telephone icon at bottom of screen to bring up the phone keypad
Type 2945#*990#
A menu will pop up. Select “Sim unlock”
Enter supplied unlock code and press “OK”
The phone will then reboot
Your phone is now unlocked
or
Power on phone with an original (from the locked carrier) SIM card inserted
Type 2945#*9701#
Press “Call”
Enter the supplied unlock code when prompted

LG KE990, KU990 VIEWTY
Power on phone with an original (from the locked carrier) SIM card inserted
Press telephone icon at bottom of screen to bring up the phone keypad
Type 2945#*990#
A menu will pop up. Select “Sim unlock”
Enter supplied unlock code and press “OK”
The phone will then reboot
Your phone is now unlocked

LG KF700 aka LG VIRGO
Power on phone with an original (from the locked carrier) SIM card inserted
Type 2945#*700#
A menu will pop up. Select “Sim unlock”
Enter supplied unlock code and press “OK”
The phone will then reboot
Your phone is now unlocked

LG KF750 aka LG SECRET
Power on phone with an original (from the locked carrier) SIM card inserted
Type 2945#*750#
A menu will pop up. Select “Sim unlock”
Enter supplied unlock code and press “OK”
The phone will then reboot
Your phone is now unlocked

LG KC550
Power on phone with an original (from the locked carrier) SIM card inserted
Type 2945#*71001#
A menu will pop up. Select “Sim unlock”
Enter supplied unlock code and press “OK”
The phone will then reboot
Your phone is now unlocked

LG KS360 aka QWERTY
Power on phone with an original (from the locked carrier) SIM card inserted
Type 2945#*71001#
A menu will pop up. Select “Sim unlock”
Enter supplied unlock code and press “OK”
The phone will then reboot
Your phone is now unlocked

LG KF755
Power on phone with an original (from the locked carrier) SIM card inserted
Type 2945#*755#
A menu will pop up. Select “Sim unlock”
Enter supplied unlock code and press “OK”
The phone will then reboot
Your phone is now unlocked

LG KF390
Power on phone with an original (from the locked carrier) SIM card inserted
Type 2945#*390#
A menu will pop up. Select “Sim unlock”
Enter supplied unlock code and press “OK”
The phone will then reboot
Your phone is now unlocked

LG KF600
Power on phone with an original (from the locked carrier) SIM card inserted
Type 2945#*600#
A menu will pop up. Select “Sim unlock”
Enter supplied unlock code and press “OK”
The phone will then reboot
Your phone is now unlocked

LG KS20
Power on phone with an original (from the locked carrier) SIM card inserted
Type 2945#*20# and 2945#*990#
A menu will pop up. Select “Sim unlock”
Enter supplied unlock code and press “OK”
The phone will then reboot
Your phone is now unlocked

LG KG245 Vodafone Australia
Insert an original (from the locked carrier) SIM card and power on the phone
Type 2945#*7101#. This will activate the extra menu
Select “Settings” -> “Security” -> “Sim lock” -> “Network”
Select “Deactivate”
Enter the 8-digit unlock code and press “OK”
Phone will display “Done”
Your phone is unlocked

LG KG800 CHOCOLATE, TG800 CHOCOLATE
Insert an original (from the locked carrier) SIM card and power on the phone
While in standby enter 2945#*5301#. This will activate the extra menu
Select “Settings” -> “Security” -> “Sim lock” -> “Network”
Select “Deactivate”
Enter supplied unlock code and press “OK”
Your phone is unlocked

LG T5100
Power on phone with a non-original SIM card inserted
Type 2945#*5301#
Go to “Menu” and then to “Settings”
Select “Security”
Select “Network Provider” and then “Deactivate”
Enter supplied unlock code
Your phone is unlocked

LG C2200
Power on phone with a non-original SIM card inserted
Type 2945#*2201#
Go to “Menu” and then to “Settings”
Select “Security”
Select “Network Provider” and then “Deactivate”
Enter supplied unlock code
Your phone is unlocked

LG G7020
Power on phone with a non-original SIM card inserted
Type 2945#*70001#
Go to “Menu” and then to “Settings”
Select “Security”
Select “Network Provider” and then “Deactivate”
Enter supplied unlock code
Your phone is unlocked

LG C3100, C3380, F2300, KE260, KE970, KG120, KG220, KG240, KG280, KG290, KG800 CHOCOLATE, KU250, KU380, TG800 CHOCOLATE
Insert an original (from the locked carrier) SIM card and power on the phone
LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KE970 press 2945#*9701#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KG290 press 2945#*7101#
LG KG800 press 2945#*7101#
LG KU250 press 2945#*250#
LG KU380 press 2945#*380#
A Secret menu will appear
Select “Settings”, “Security” and then “Sim lock”
Enter supplied unlock code and press “OK”
Your phone is unlocked

LG KU311, KU800, L600V, U8150, U8210, U8500
Insert a non-original SIM card and power on the phone
LG KU311 press 815118#*#
LG KU800 press 82652#*#
LG L600v press 815118#*#
LG U8150 press 277634#*#
LG U8210 press 277634#*#
LG U8500 press 277634#*#
Enter supplied unlock code and press “OK”
Your phone is unlocked
Motorola

Power on phone with a non-original SIM card inserted
Enter unlock code when prompted
Your phone is unlocked

Warning!
If one of the followings messages appear
“Contact Service Provider”
“Tampert Alter”
“Wait before enter special Code”
“Contact Service”

Power on the phone and leave it for 40 minitues to 5 hours until you see the message “Enter Special Code”

Motorola 3G
If your phone is on a 3G network enter **057*
Then enter the unlock code into the window

Motorola CDMA & TDMA
Press 74663 # [Menu] [Menu] and you will be asked for a subsidy code
Enter the code you received from XXXXXXXX
Your phone is now unlocked

Motorola MPX
Switch ON your phone with a not allowed SIM card
If phone is asking for NETWORK PIN enter the NETWORK PIN we sent you
If phone is asking for SERVICE PROVIDER PIN. Enter the SERVICE PROVIDER PIN we sent you
Your phone is now unlocked

If phone is asking for NETWORK PUK
Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu
Type * # * * 3 6 4 # and press green button
You will get a error message and after it your will see Engineering menu
Click Options
Click GSM Test
Select Send AT command
Now you will see a new window Saying “Send AT Command”
Type AT+CLCK=”PN”,0,”[SERVICE PROVIDER PIN or NETWORK PIN]” and press send
If you get Response “0 []” phone is unlocked
If you get 1 error, then make sure you have typed the code correct and try the other code

Switch your phone off, take battery out. Put battery back in. Power on the phone and leave it for 40 minitues to 5 hours until the message “Enter NETWORK PUK” is gone. Now enter the code received from us and 00000000 (eight zero’s) as a new password.

If phone is asking for SERVICE PROVIDER PUK
Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu
Type * # * * 3 6 4 # and press green button
You will get a error message and after it your will see Engineering menu
Click Options
Click GSM Test
Select Send AT command
Now you will see a new window Saying “Send AT Command”
Type AT+CLCK=”PP”,0,”[SERVICE PROVIDER PIN or NETWORK PIN]” and press send
If you get Response “0 []” phone is unlocked
If you get 1 error, then make sure you have typed the code correct and try the other code

If you do not have the original card or if the original card is not accepted because you flashed the phone with other firmware, then we can not help you

NEC

NEC N342i
Power on phone without a SIM card
Compose **00012*CODE# where “CODE” is the unlock code you received from XXXXXXXX
Your cell phone is now unlocked

Other NEC models
Power on phone without a SIM card
Compose #7320*CODE# where “CODE” is the unlock code you received from XXXXXXXX
Your cell phone is now unlocked

Older NEC models
Power on phone without a SIM card
Compose #3210*CODE# where “CODE” is the unlock code you received from XXXXXXXX
Your cell phone is now unlocked

Nokia

All Nokia Models
Power on phone without a SIM card
Compose #PW+CODE+1# where “CODE” is the unlock code you received from XXXXXXXX To get letter P quickly press 3 times the star button ( * )
To get letter W quickly press 4 times the star button ( * )
To get sign + quickly press 2 times the star button ( * )
You will see a message “SIM Restriction Off”
Your cell phone is now unlocked

HTC, Pocket PC, XDA, Qtek, Dopod, i-Mate, XDA, etc

Power on phone with a non-original SIM card inserted
When prompted, enter unlock code you received from XXXXXXXX Attention! Use the onscreen keyboard and make sure that wireless mode is OFF.
Your cell phone is now unlocked

If you see a message Sim lock. You can still make emergency calls your phone has a blocked counter due to several previous incorrectly entered unlock codes. The only solution in this case is to upgrade phone’s ROM which will reset the counter and allow to enter the code.

Pantech

Power on phone with a non-original SIM card inserted
When prompted enter unlock code you received from XXXXXXXX Attention! Use the onscreen keyboard and make sure that wireless mode is OFF.
Your cell phone is now unlocked
Pantech C150
Turn on phone with existing (original) SIM card
At main menu screen, enter *#865625#
When prompted, enter unlock code you received from XXXXXXXX

Switch to our mobile site